dnac

The video shows you a capability to enable an Embedded WLC as part of a Fabric-In-the-Box solution on Cisco DNAC 2.1. We will enable this at our BR1 site where SDA fabric is already setup on a single Catalyst 9000 switch. Both basic connectivity and SGT will be tested. The video finishes with a deployment of wireless guest SSID that tunnels traffic to a Guest Border device.

The video shows you how to inter-connect multiple SDA sites over SDA transit on Cisco DNAC 2.1. We will bring up a SDA transit control-plane running LISP and MPBGP, and connect three SDA sites. End-to-end connectivity will be tested with 802.1x authentication and SGT enforcement. Wireshark packet capture will be performed to reveal underlying activity and packet structure.

The video shows you how to inter-connect multiple SDA sites over SDA transit on Cisco DNAC 2.1. We will bring up a SDA transit control-plane running LISP and MPBGP, and connect three SDA sites. End-to-end connectivity will be tested with 802.1x authentication and SGT enforcement. Wireshark packet capture will be performed to reveal underlying activity and packet structure.

The video shows you how to inter-connect multiple SDA sites over SDA transit on Cisco DNAC 2.1. We will bring up a SDA transit control-plane running LISP and MPBGP, and connect three SDA sites. End-to-end connectivity will be tested with 802.1x authentication and SGT enforcement. Wireshark packet capture will be performed to reveal underlying activity and packet structure.

The video goes through SDA fabric provisioning at two remote sites in our lab on Cisco DNAC 2.1. Branch 1 will be a Fabric-in-a-Box, while Branch 2 will be a small fabric with one Border/Control Plane node and one Fabric Edge. An endpoint at each site will have local fabric access by the end of the lab. This is to prepare for fabric site connectivity in the future video.

The video goes through SDA fabric provisioning at two remote sites in our lab on Cisco DNAC 2.1. Branch 1 will be a Fabric-in-a-Box, while Branch 2 will be a small fabric with one Border/Control Plane node and one Fabric Edge. An endpoint at each site will have local fabric access by the end of the lab. This is to prepare for fabric site connectivity in the future video.

The video goes through SDA fabric provisioning at two remote sites in our lab on Cisco DNAC 2.1. Branch 1 will be a Fabric-in-a-Box, while Branch 2 will be a small fabric with one Border/Control Plane node and one Fabric Edge. An endpoint at each site will have local fabric access by the end of the lab. This is to prepare for fabric site connectivity in the future video.

The video walks you through our lab setup for Cisco SDA Multi-Site on Cisco DNAC 2.1 that will lay a foundation for our subsequent labs. We will explain a lab topology and perform device discovery to have all devices added to DNAC inventory.

The video walks you through four different features that allow you to handle Layer 2 traffic in Cisco SDA on DNAC 2.1. These features are L2 flooding to override the default behavior of routed access, directed broadcast, L2VNI that makes a network segment behaves strictly as Layer 2 without an SVI, and L2 border to extend a fabric to a legacy Layer 2 network.

The video walks you through four different features that allow you to handle Layer 2 traffic in Cisco SDA on DNAC 2.1. These features are L2 flooding to override the default behavior of routed access, directed broadcast, L2VNI that makes a network segment behaves strictly as Layer 2 without an SVI, and L2 border to extend a fabric to a legacy Layer 2 network.