wireless

The video walks you through a configuration of FlexConnect wireless on Cisco DNAC 2.1. We will use our second remote site BR2 in this demonstration. The goal is to locally-switch user wireless traffic while utilizing a centralized WLC. We will also be experimenting with dynamic VLAN assignment and ISE guest portal.

The video walks you through a configuration of FlexConnect wireless on Cisco DNAC 2.1. We will use our second remote site BR2 in this demonstration. The goal is to locally-switch user wireless traffic while utilizing a centralized WLC. We will also be experimenting with dynamic VLAN assignment and ISE guest portal.

The video walks you through a configuration of FlexConnect wireless on Cisco DNAC 2.1. We will use our second remote site BR2 in this demonstration. The goal is to locally-switch user wireless traffic while utilizing a centralized WLC. We will also be experimenting with dynamic VLAN assignment and ISE guest portal.

The video shows you a capability to enable an Embedded WLC as part of a Fabric-In-the-Box solution on Cisco DNAC 2.1. We will enable this at our BR1 site where SDA fabric is already setup on a single Catalyst 9000 switch. Both basic connectivity and SGT will be tested. The video finishes with a deployment of wireless guest SSID that tunnels traffic to a Guest Border device.

The video shows you a capability to enable an Embedded WLC as part of a Fabric-In-the-Box solution on Cisco DNAC 2.1. We will enable this at our BR1 site where SDA fabric is already setup on a single Catalyst 9000 switch. Both basic connectivity and SGT will be tested. The video finishes with a deployment of wireless guest SSID that tunnels traffic to a Guest Border device.

The video shows you a capability to enable an Embedded WLC as part of a Fabric-In-the-Box solution on Cisco DNAC 2.1. We will enable this at our BR1 site where SDA fabric is already setup on a single Catalyst 9000 switch. Both basic connectivity and SGT will be tested. The video finishes with a deployment of wireless guest SSID that tunnels traffic to a Guest Border device.

The video looks into two wireless security features on Cisco DNAC 2.1: Rogue AP detection, and aWIPS. We will cover rogue management life cycle performed on DNAC from detection, classification, whitelisting, and containment. For aWIPS, we will review threats and signatures currently supported on the DNAC.

The video looks into two wireless security features on Cisco DNAC 2.1: Rogue AP detection, and aWIPS. We will cover rogue management life cycle performed on DNAC from detection, classification, whitelisting, and containment. For aWIPS, we will review threats and signatures currently supported on the DNAC.

The video shows you different wireless tools available in Cisco DNAC 2.1. We will go through Wireless Sensor provisioning and configuration process that will help you actively monitor your wireless environment. Some of the grate tools for wireless analytic and troubleshooting covered here include WiFi6 analysis, AI-driven insight, client 360, intelligent capture and spectrum analysis.

The video shows you different wireless tools available in Cisco DNAC 2.1. We will go through Wireless Sensor provisioning and configuration process that will help you actively monitor your wireless environment. Some of the grate tools for wireless analytic and troubleshooting covered here include WiFi6 analysis, AI-driven insight, client 360, intelligent capture and spectrum analysis.