View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

sgt

RS0195 - DNAC 2.1 Multi-Site IP Transit with SXP (Part 3)

The video shows you how you can implement Cisco TrustSec across a SDA IP Transit using SXP. Cisco ISE will be used as SXP Speaker to distribute SGT-to-IP mapping to Border nodes at fabric sites. We will enforce SGACL on traffic between sites and achieve similar security as in SDA transit.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0195 - DNAC 2.1 Multi-Site IP Transit with SXP (Part 2)

The video shows you how you can implement Cisco TrustSec across a SDA IP Transit using SXP. Cisco ISE will be used as SXP Speaker to distribute SGT-to-IP mapping to Border nodes at fabric sites. We will enforce SGACL on traffic between sites and achieve similar security as in SDA transit.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0195 - DNAC 2.1 Multi-Site IP Transit with SXP (Part 1)

The video shows you how you can implement Cisco TrustSec across a SDA IP Transit using SXP. Cisco ISE will be used as SXP Speaker to distribute SGT-to-IP mapping to Border nodes at fabric sites. We will enforce SGACL on traffic between sites and achieve similar security as in SDA transit.

Rating: 
0
No votes yet
Difficulty Level: 
4

RS0188 - DNAC 2.1 Multi-Site SDA Transit (Part 3)

The video shows you how to inter-connect multiple SDA sites over SDA transit on Cisco DNAC 2.1. We will bring up a SDA transit control-plane running LISP and MPBGP, and connect three SDA sites. End-to-end connectivity will be tested with 802.1x authentication and SGT enforcement. Wireshark packet capture will be performed to reveal underlying activity and packet structure.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0188 - DNAC 2.1 Multi-Site SDA Transit (Part 2)

The video shows you how to inter-connect multiple SDA sites over SDA transit on Cisco DNAC 2.1. We will bring up a SDA transit control-plane running LISP and MPBGP, and connect three SDA sites. End-to-end connectivity will be tested with 802.1x authentication and SGT enforcement. Wireshark packet capture will be performed to reveal underlying activity and packet structure.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0188 - DNAC 2.1 Multi-Site SDA Transit (Part 1)

The video shows you how to inter-connect multiple SDA sites over SDA transit on Cisco DNAC 2.1. We will bring up a SDA transit control-plane running LISP and MPBGP, and connect three SDA sites. End-to-end connectivity will be tested with 802.1x authentication and SGT enforcement. Wireshark packet capture will be performed to reveal underlying activity and packet structure.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 4)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 3)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 2)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

RS0177 - DNAC 2.1 Wireless Fabric Mode (Part 1)

The video shows you how to configure fabric-enabled wireless on Cisco DNAC 2.1. We will go through design, provisioning and testing WLC and AP. You will see configuration automation the DNAC performs. Security policy is enabled to enforce consistent access security on wireless client as on wired network. We will also review captured packet from an AP.

Rating: 
0
No votes yet
Difficulty Level: 
3

Pages

Subscribe to RSS - sgt