cimc

The video shows you the process of ACI fabric provisioning. We will be going through a fabric design, planning, assigning network parameters, initialization of APIC servers, building ACI fabric from scratch, and performing discovery of APIC servers, leaf and spine switches. This is a very important step when bringing up a new ACI fabric.

The video shows you the process of ACI fabric provisioning. We will be going through a fabric design, planning, assigning network parameters, initialization of APIC servers, building ACI fabric from scratch, and performing discovery of APIC servers, leaf and spine switches. This is a very important step when bringing up a new ACI fabric.

The video demonstrates an installation of VMware ESXi 5.5 on Cisco UCS-E. We will utilize the virtual KVM and virtual media to perform installation. Basic networking will be configured. We will have an operational ESXi install by the end of the video.

The video walks you through an upgrade process of Cisco UCS-E CIMC using Host Upgrade Utility (HUU). This will then be followed by a manual upgrade to take our CIMC to the latest version.

The video shows different interface options available, internal as well as external, to gain access to CIMC on Cisco UCS-E. The demonstration will be on EN120E and E140D UCS-E modules in ISR G2. The configuration will be compared to ISR 4K with their differences noted. We will then go through CIMC web interface and complete the remaining configuration.

The video shows different interface options available, internal as well as external, to gain access to CIMC on Cisco UCS-E. The demonstration will be on EN120E and E140D UCS-E modules in ISR G2. The configuration will be compared to ISR 4K with their differences noted. We will then go through CIMC web interface and complete the remaining configuration.

The video shows different interface options available, internal as well as external, to gain access to CIMC on Cisco UCS-E. The demonstration will be on EN120E and E140D UCS-E modules in ISR G2. The configuration will be compared to ISR 4K with their differences noted. We will then go through CIMC web interface and complete the remaining configuration.

The video walks you through a process of recovering Cisco UCS E-Series server. Here we assume our UCS-E servers are in an inoperable state and requires a recovery. We will install CIMC from recovery mode and attempt to bring the servers back to their operations. We will use UCS EN120E and EN140D in our demonstration.

The video introduces you Cisco UCS E-Series servers. We will cover currently available products, and then walk you through anatomy of the servers including type of internal and external interfaces, and their inner interconnection and operations. Both ISE G2 and 4K will be discussed and noted for their differences.