You are here
WL0020 - WLC Radio Configuration and RRM (Part 2)
Difficulty Level:
Lab Document:
<Please login to see the content>
Category:
Wireless
Video Download:
Title: WL0020 - Video Download $11.00
The video looks at Radio Resource Management aspects of Cisco Wireless LAN Controller. We will go through global radio configuration and explain each of the configurable option for both 5GHz and 2.4GHz while recommending best practices. We will also upon configuration and the significance of RF Group.
Part 2 of this video covers radio configuration of 5GHz 802.11a/n/ac
Topic:
- Radio Resource Management (RRM)
- RF Group
- 802.11k Assisted Roaming
- Load Balancing & Band Select
- Rx SOP
- Optimized Roaming
- Network Profile
- Data Rate
- Transmit Power Control (TPC)
- Dynamic Channel Assignment (DCA)
- Coverage Hole Detection (CHD)
- Client Roaming
About Author
Metha Chiewanichakorn, CCIE#23585 (Ent. Infra, Sec, SP), is a Cisco networking enthusiast with years of experience in the industry. He is currently working as a consulting engineer for a Cisco partner. As a founder of and an instructor at labminutes.com, Metha enjoys learning and challenges himself with new technologies.
2 comments
issue with my data-rate
I've just deployed a WLC with one AP.
one wire I get about 50 mbos download, but while on Wireless I get about 1.2 mbps download.
I've disabled the lower data-rate and add Mandatory on 24 mbps and up, but still not able to get a good result.
is there something else I have to check ?
thank yuo
issue with my data-rate
Are you using 11n or 11ac, 2.4 or 5Hz? What speed is reported on the wireless client? How do you test the speed? What AP and wireless client are you using?