atom

The video demonstrates another method of routing L2VPN traffic using Cisco MPLS Traffic Engineering (TE) tunnel. Instead of relying on targeted LDP, we will be leveraging MPLS TE for label exchange and traffic path control. We will also look at a way to provide redundancy using a backup pseudowire. We will perform Wireshark packet capture and review control and data packets. 

The video walks you through configuration of Cisco Any Transport over MPLS (AToM) interworking. In our first two scenarios, we will be configuring EoMPLS to provide Layer2 connectivity between sites with disparate circuit type, specifically non-tag and 802.1q circuit, using Ethernet and VLAN mode. Our last scenario involves interworking of non-Ethernet circuit to an Ethernet circuit, which will call for an IP mode. Wireshark packet capture will be performed and we will notes the differences in packet structure with interworking.

The video walks you through configuration of Cisco Any Transport over MPLS (AToM) interworking. In our first two scenarios, we will be configuring EoMPLS to provide Layer2 connectivity between sites with disparate circuit type, specifically non-tag and 802.1q circuit, using Ethernet and VLAN mode. Our last scenario involves interworking of non-Ethernet circuit to an Ethernet circuit, which will call for an IP mode. Wireshark packet capture will be performed and we will notes the differences in packet structure with interworking.

The video walks you through configuration of Cisco Any Transport over MPLS (AToM). Since Ethernet circuit has become much more common nowadays, we will only focus on providing Layer 2 VPN connectivity using point-to-point Ethernet (EoMPLS) which is considered a type of Virtual Private Wire Service (VPWS). We will compare various mode of operation including Port mode, VLAN mode, and VLAN translation. To get better insight of the underlying protocol and frame structure, we will perform Wireshark packet capture and review control and data packets. 

The video walks you through configuration of Cisco Any Transport over MPLS (AToM). Since Ethernet circuit has become much more common nowadays, we will only focus on providing Layer 2 VPN connectivity using point-to-point Ethernet (EoMPLS) which is considered a type of Virtual Private Wire Service (VPWS). We will compare various mode of operation including Port mode, VLAN mode, and VLAN translation. To get better insight of the underlying protocol and frame structure, we will perform Wireshark packet capture and review control and data packets.