View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

upgrade

SEC0290 - ISE 2.2 Distributed Deployment Upgrade

The video shows a procedure to upgrade a Cisco ISE 2.1 2-node distributed deployment to ISE 2.2 using the web interface. We will discuss any prerequisite and also what to expect if you have more than 2 ISE nodes to upgrade.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

RS0090 - Prime 3.1 Device Software Management (Part 3)

The video demonstrates a use of Device Software Management function on Cisco Prime Infrastructure 3.1 to centrally manage software image of devices in your network. We will use Prime to upgrade our router and switch by going through the image management life cycle. We will then show that Prime is also capable of upgrading WLC.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

RS0090 - Prime 3.1 Device Software Management (Part 2)

The video demonstrates a use of Device Software Management function on Cisco Prime Infrastructure 3.1 to centrally manage software image of devices in your network. We will use Prime to upgrade our router and switch by going through the image management life cycle. We will then show that Prime is also capable of upgrading WLC.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

RS0090 - Prime 3.1 Device Software Management (Part 1)

The video demonstrates a use of Device Software Management function on Cisco Prime Infrastructure 3.1 to centrally manage software image of devices in your network. We will use Prime to upgrade our router and switch by going through the image management life cycle. We will then show that Prime is also capable of upgrading WLC.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

RS0085 - Prime 3.1 Upgrade

The video walks you through an inline upgrade process from Cisco Prime Infrastructure 3.0 to 3.1. We will also discuss the preparation that you need prior to the upgrade. 
Rating: 
5
Average: 5 (2 votes)
Difficulty Level: 
0

RS0074 - UCS-E Upgrade

The video walks you through an upgrade process of Cisco UCS-E CIMC using Host Upgrade Utility (HUU). This will then be followed by a manual upgrade to take our CIMC to the latest version.
Rating: 
0
No votes yet
Difficulty Level: 
2

Cisco ISR 4000 Router Upgrade Guide from 3.x to Denali 16.2

Since Cisco announced an intention to unify software version across routing and switch platforms, we have already seen the first software release of Denali 16.1 on Cisco IOS XE switches. Subsequently, Cisco has also released the first common software version between router and switch with Denali 16.2.1. While you can upgrade a switch as you normally would, upgrading a router requires a closer attention. In this article, we will show you how to upgrade an ISR 4000 to Denali 16.2.1. We will be using ISR 4321 running IOS XE 3.6.

SEC0157 - ASA CX Upgrade

The video talks you through steps to upgrade Cisco PRSM server and ASA CX from version 9.2 to 9.3. We will be using web interface to perform the upgrade and explain its benefit over command line. We will also be discussing specifics of upgrade throughout this video to help you avoid any possible gotchas. Most importantly, you can get the sense of how long the whole upgrade process may take.

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0107 - ISE 1.1 to 1.2 Upgrade (Part 2)

The video takes you through an upgrade procedure from Cisco ISE 1.1 to 1.2. We will go over some upgrade considerations and pre-requisites and also make sure you are aware of any caveats. Our lab starts with a functioning ISE 1.1 setup, and we will make comparison to the system after being upgraded to ISE 1.2. Although this lab video is for a standalone system, a lot of our discussions and demonstration here also apply to a distributed deployment.

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0107 - ISE 1.1 to 1.2 Upgrade (Part 1)

The video takes you through an upgrade procedure from Cisco ISE 1.1 to 1.2. We will go over some upgrade considerations and pre-requisites and also make sure you are aware of any caveats. Our lab starts with a functioning ISE 1.1 setup, and we will make comparison to the system after being upgraded to ISE 1.2. Although this lab video is for a standalone system, a lot of our discussions and demonstration here also apply to a distributed deployment.

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

Pages

Subscribe to RSS - upgrade

Lab Minutes Classifieds