View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

trustsec

SEC0221 - ISE 2.0 TrustSec - MACsec (Part 2)

The video shows you how to enable MACsec (802.1AE) Layer 2 Link encryption on Cisco ISE 2.0. We will cover both endpoint-to-switch and switch-to-switch scenarios. Cisco AnyConnect NAM will be used in endpoint-to-switch MACsec. Switch-to-Switch MACsec will be performed as part of TrustSec as well as manual configuration. At the end, we will analyse MACsec frame with Wireshark.
Rating: 
0
No votes yet
Difficulty Level: 
4

SEC0221 - ISE 2.0 TrustSec - MACsec (Part 1)

The video shows you how to enable MACsec (802.1AE) Layer 2 Link encryption on Cisco ISE 2.0. We will cover both endpoint-to-switch and switch-to-switch scenarios. Cisco AnyConnect NAM will be used in endpoint-to-switch MACsec. Switch-to-Switch MACsec will be performed as part of TrustSec as well as manual configuration. At the end, we will analyse MACsec frame with Wireshark.
Rating: 
0
No votes yet
Difficulty Level: 
4

SEC0220 - ISE 2.0 TrustSec - SXP (Part 3)

The video demonstrates SXP capability on Cisco ISE 2.0 to relay SGT between SXP-capable network devices. We will use WLC as SXP speaker, while ASA and switch as listeners and enforcers. The switch has SGACL implemented from the previous video and the ASA will leverage SGT in its ACL. We will also look at Static SXP Mapping.
Rating: 
0
No votes yet
Difficulty Level: 
4

SEC0220 - ISE 2.0 TrustSec - SXP (Part 2)

The video demonstrates SXP capability on Cisco ISE 2.0 to relay SGT between SXP-capable network devices. We will use WLC as SXP speaker, while ASA and switch as listeners and enforcers. The switch has SGACL implemented from the previous video and the ASA will leverage SGT in its ACL. We will also look at Static SXP Mapping.
Rating: 
0
No votes yet
Difficulty Level: 
4

SEC0220 - ISE 2.0 TrustSec - SXP (Part 1)

The video demonstrates SXP capability on Cisco ISE 2.0 to relay SGT between SXP-capable network devices. We will use WLC as SXP speaker, while ASA and switch as listeners and enforcers. The switch has SGACL implemented from the previous video and the ASA will leverage SGT in its ACL. We will also look at Static SXP Mapping.
Rating: 
0
No votes yet
Difficulty Level: 
4

SEC0219 - ISE 2.0 TrustSec - FlexVPN and ZBFW (Part 3)

The video attempts to implement SGT propagation across a WAN over FlexVPN. We will demonstrate capability of Cisco router in participating Cisco TrustSec including joining SGT trust domain, Network Device Authorization, SGT propagation, and enforcement. We will configure ZBFW to utilize source SGT in conjunction with ACL to restrict network access.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0219 - ISE 2.0 TrustSec - FlexVPN and ZBFW (Part 2)

The video attempts to implement SGT propagation across a WAN over FlexVPN. We will demonstrate capability of Cisco router in participating Cisco TrustSec including joining SGT trust domain, Network Device Authorization, SGT propagation, and enforcement. We will configure ZBFW to utilize source SGT in conjunction with ACL to restrict network access.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0219 - ISE 2.0 TrustSec - FlexVPN and ZBFW (Part 1)

The video attempts to implement SGT propagation across a WAN over FlexVPN. We will demonstrate capability of Cisco router in participating Cisco TrustSec including joining SGT trust domain, Network Device Authorization, SGT propagation, and enforcement. We will configure ZBFW to utilize source SGT in conjunction with ACL to restrict network access.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0218 - ISE 2.0 TrustSec - SGACL (Part 3)

The video walks you through configuration of SGACL on Cisco ISE 2.0. Using the SGT created in the previous video, we will map them into SGACL matrix and apply appropriate access policy. We will configure a switch to download SGACL from ISE and have it act as our enforcement point (Network as a Enforcer). 
Rating: 
0
No votes yet
Difficulty Level: 
4

SEC0218 - ISE 2.0 TrustSec - SGACL (Part 2)

The video walks you through configuration of SGACL on Cisco ISE 2.0. Using the SGT created in the previous video, we will map them into SGACL matrix and apply appropriate access policy. We will configure a switch to download SGACL from ISE and have it act as our enforcement point (Network as a Enforcer). 
Rating: 
0
No votes yet
Difficulty Level: 
4

Pages

Subscribe to RSS - trustsec

Lab Minutes Classifieds