ios-xe

The video goes in-depth into the topic of TLOC Extension in Cisco Catalyst SD-WAN. We begin with an explanation of problems that it solves. We then dive into its configuration using Edge devices at BR1 site. We finish with a discussion of the feature caveats. 

The video goes in-depth into the topic of TLOC Extension in Cisco Catalyst SD-WAN. We begin with an explanation of problems that it solves. We then dive into its configuration using Edge devices at BR1 site. We finish with a discussion of the feature caveats. 

The video takes you through a configuration of BGP routing in Cisco Catalyst SD-WAN. The BGP in this lab will be used on a transport MPLS interface to advertise Edge device loopback interface. The second half of the videos looks at a use of BFD to reduce BGP convergence time.

The video takes you through a configuration of BGP routing in Cisco Catalyst SD-WAN. The BGP in this lab will be used on a transport MPLS interface to advertise Edge device loopback interface. The second half of the videos looks at a use of BFD to reduce BGP convergence time.

The video takes you through a configuration of BGP routing in Cisco Catalyst SD-WAN. The BGP in this lab will be used on a transport MPLS interface to advertise Edge device loopback interface. The second half of the videos looks at a use of BFD to reduce BGP convergence time.

The video takes you through a configuration of three routing protocols; static, EIGRP and OSPF, in Cisco Catalyst SD-WAN. We will start with using static routing on lab HQ routers, before converting it to EIGRP. OSPF will be used to advertise one of our branch subnets. You will also learn about route redistribution between OMP and the routing protocols. 

The video takes you through a configuration of three routing protocols; static, EIGRP and OSPF, in Cisco Catalyst SD-WAN. We will start with using static routing on lab HQ routers, before converting it to EIGRP. OSPF will be used to advertise one of our branch subnets. You will also learn about route redistribution between OMP and the routing protocols. 

The video takes you through a configuration of three routing protocols; static, EIGRP and OSPF, in Cisco Catalyst SD-WAN. We will start with using static routing on lab HQ routers, before converting it to EIGRP. OSPF will be used to advertise one of our branch subnets. You will also learn about route redistribution between OMP and the routing protocols. 

The video takes you through a configuration of three routing protocols; static, EIGRP and OSPF, in Cisco Catalyst SD-WAN. We will start with using static routing on lab HQ routers, before converting it to EIGRP. OSPF will be used to advertise one of our branch subnets. You will also learn about route redistribution between OMP and the routing protocols. 

The video looks into route advertisement in Cisco Catalyst SD-WAN. We begin by reviewing OMP and BFD feature templates. We will then create Service VPN and Interfaces and start advertising routes for connected interfaces including a loopback. Our lab will have full reachability between sites at the end this lab.