View Cart
0 Items | Total: US$0.00
Welcome,      Register

You are here

installation

RS0076 - vNAM Installation

The video walks you through an installation process of Cisco Virtual Network Analysis Module (vNAM) specifically on Cisco UCS-E. We will go over different deployment models before diving into the ESXi configuration and VM installation. We will have a functioning vNAM with accessible GUI and ready to accept traffic by the end of the video
Rating: 
5
Average: 5 (2 votes)
Difficulty Level: 
0

WL0003 - WLC Basic Installation (Part 2)

The video walks you through three different methods of installing and initializing Cisco Wireless LAN Controller. We will start by using a Command Line Interface (CLI) which is known to work well and supported on all controller platforms.  With recent software releases, you also have an option to perform initialization via GUI and we will demonstrate this over both wire and wireless. This is also known as WLAN Express Setup on Cisco 2504 with best-practices and configuration optimization built-in. 

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

WL0003 - WLC Basic Installation (Part 1)

The video walks you through three different methods of installing and initializing Cisco Wireless LAN Controller. We will start by using a Command Line Interface (CLI) which is known to work well and supported on all controller platforms.  With recent software releases, you also have an option to perform initialization via GUI and we will demonstrate this over both wire and wireless. This is also known as WLAN Express Setup on Cisco 2504 with best-practices and configuration optimization built-in. 

Rating: 
5
Average: 5 (3 votes)
Difficulty Level: 
0

SEC0181 - ISE 1.3 VMware Installation

The video introduces you to file policy used to perform file type filtering, and detection on Cisco ASA FirePower. Our lab scenarios include blocking and detecting file upload and download through Sharepoint web application and FTP protocol, as well as the ability to capture files. A caveat of having a file transfer in a HTTPS session is also demonstrated.

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0146 - ASA CX Context Directory Agent Installation

The video walks you through an installation of Cisco Context Directory Agent (CDA) server. We will start by prepping a non-domain admin service account for CDA to use to contact Windows Active Directory. We will then step through a virtual machine creation, software installation and patching. We will also spend some time on the CDA web interface. By the end of the lab, we will be able to have CDA monitor user AD login activities and create user-to-IP mapping information that we will leverage in the future videos. 

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0141 - ASA CX Prime Security Manager Installation

The video walks you through an installation of Cisco Prime Security Manager (PRSM) server for managing multiple CX devices. You will get to see the start, where a virtual machine is created, to the finish, where the web interface can be accessed. Since the installation is performed in VMware, a knowledge of VMware ESXi is recommended.
Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0139 - ASA CX Service Installation

The video shows you how to install Cisco ASA CX software service version 9.3 from scratch. Here we assume to have a blank SSD although the same procedure also applies if you want to perform a module recovery. We will be able to access the CX web interface by the end of this video.
Rating: 
5
Average: 5 (2 votes)
Difficulty Level: 
0

SEC0106 - ISE 1.2 VMware Sizing and Installation (Part 2)

The video walks you through an installation of Cisco Identity Services Engine (ISE) 1.2 on VMware. We will start off with a discussion of deployment sizing strategies on how to pick your appliances and size your VM. We will then guide you step-by-step through the installation process. At the end of this lab, you should have a working ISE server that you can use for future labs. No configuration, other than the setup process, is performed in this video. The video assumes that you have basic working knowledge of VMware ESXi.

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
0

SEC0106 - ISE 1.2 VMware Sizing and Installation (Part 1)

The video walks you through an installation of Cisco Identity Services Engine (ISE) 1.2 on VMware. We will start off with a discussion of deployment sizing strategies on how to pick your appliances and size your VM. We will then guide you step-by-step through the installation process. At the end of this lab, you should have a working ISE server that you can use for future labs. No configuration, other than the setup process, is performed in this video. The video assumes that you have basic working knowledge of VMware ESXi.

Rating: 
5
Average: 5 (1 vote)
Difficulty Level: 
1

SEC0075 - ASA 1000V Installation (ASDM CLI Mode)

The video walks you through an installation process of redundant ASA 1000V in ASDM mode from .ova file. We will create VLAN and port-profiles on Cisco Nexus 1000V for interfaces on ASA 1000V. At the end of the lab, we will register the ASA 1000V to a VNMC and be ready for configuration.
Notes:
  • ASA 1000V has four main interfaces
    • Outside
    • Inside
    • Management
    • Failover
  • ASA 1000V may have additional logical security profile interfaces 
Rating: 
0
No votes yet
Difficulty Level: 
2

Pages

Subscribe to RSS - installation